Get a FREE Quote
01438 487210
Resin bound driveway in front of a detached brick house
Paving & Landscaping Contractor

Resin Bound Driveways in Stevenage

Get a smooth, porous finish that lets rain soak through, laid over a carefully prepared base, with free colour ideas and an honest quote first.

Call 01438 487210

Get a FREE Quote

Fill in the form and we'll get back to you shortly.

Step 1 of 2

Resin Surfacing

Resin Bound Drives Explained

Resin bound surfacing mixes natural aggregate with a clear resin and trowels it flat to a smooth, even finish. Because the stones are fully coated rather than scattered on top, nothing comes loose underfoot, and there are no gaps for weeds to root into from above.

The mix is porous, so rainwater drains straight through into the base below instead of sitting on top or running off. That helps a front driveway in Stevenage or Hertfordshire meet the permeable-surface rules many councils apply, and it means fewer puddles at the door after a downpour.

A resin layer is only as good as what lies beneath it. It can go over sound tarmac or concrete, or over a new open-graded base where the old surface has failed, and the survey decides which route suits your drive.

Get a FREE QuoteCall 01438 487210
Long grey resin bound driveway beside a lawn
New resin bound driveway in front of a red brick semi-detached house
Golden resin bound driveway curving round a lawn
Grey resin bound driveway with a charcoal block border
Resin Bound Driveways: What's Included

Inside a Resin Bound Job

Resin bound looks simple once it is down, but the result depends on preparation and careful mixing. A typical job on a home driveway covers each of the following parts.

  • Checking whether the existing surface can stay
  • Building a new porous base where the old one fails
  • Edging to frame the resin and keep a clean line
  • UV-stable resin so lighter colours resist yellowing
  • Dried aggregate mixed in measured batches on site
  • Hand-trowelling to an even depth and smooth finish
  • Anti-slip grit where the drive slopes or turns
Why Choose Us for Resin Bound Driveways

Why Us for Resin Bound

Resin is unforgiving of rushed preparation or a poor base. These are the reasons to have this business plan and lay your resin bound drive in Hertfordshire.

Resin bound driveway being laid by hand

Colours Chosen with You

Free design ideas help you pick aggregate blends and border colours that suit the front of your house, so the finished drive sits naturally with the property.

Base Assessed First

The free survey checks whether your current tarmac or concrete is sound enough to overlay or needs replacing first.

Photos Before a Visit

Pictures of your drive sent on WhatsApp are enough for a first opinion on whether resin can go straight over the top.

Owner-Run Business

Questions about colour, depth and upkeep go straight to the owner, who makes the decisions and stands behind the advice.

Ready to Get Started?

Ring Herts Paving & Landscaping, or leave your details for a quote.

Get a FREE QuoteCall 01438 487210

Swipe to See More

More Driveway Services

Explore Other Drive Options

Weighing resin against another surface, or need help with a drive you already own? These pages each cover one driveway service in detail.

Driveways by Herts Paving & LandscapingDriveways
New Driveways by Herts Paving & LandscapingNew Driveways
Block Paving by Herts Paving & LandscapingBlock Paving
Tarmac Driveways by Herts Paving & LandscapingTarmac Driveways
Gravel Driveways by Herts Paving & LandscapingGravel Driveways
Driveway Cleaning by Herts Paving & LandscapingDriveway Cleaning
Driveway Repairs by Herts Paving & LandscapingDriveway Repairs

Swipe to See More

Planning a Resin Driveway?

Ring now, or leave a few details and a quote will follow.

Get a FREE QuoteCall 01438 487210
Resin Bound Driveways: How It Works

How Resin Bound Is Laid

Resin bound installation follows a clear order, and the weather on the day plays a part in when the mix goes down.

1

Survey & Colour Choice

The existing surface is checked, the area is measured, and you compare aggregate blends to settle on a colour for the drive.

2

Preparing the Base

Any failed surface is removed and a porous base is laid, or the existing one is cleaned and repaired, with edging fixed around it.

3

Mixing & Trowelling

Resin and dry aggregate are mixed in batches and spread to an even depth, then trowelled smooth before the mix starts to set.

4

Curing & Handover

The surface is left to cure before any traffic goes on it. We review the completed work with you and confirm everything has been done as agreed.

Swipe to See More

Resin Bound Driveways FAQs

Resin Driveway Questions

What Is the Difference Between Resin Bound & Resin Bonded?

Resin bound mixes the stones into the resin before laying, giving a smooth, porous surface with no loose gravel. Resin bonded spreads resin on the base first and scatters stones over it, leaving a rougher texture that is not porous and can shed loose stones as it ages.

Can Resin Bound Go Over My Existing Tarmac?

Often, yes, if the tarmac is sound, reasonably level and free of deep cracks or soft spots. Cracks in the old layer can show through the resin later, so a failing surface is better replaced with a new base. Looking at the drive in person shows which applies to yours.

How Long Before I Can Park on a New Resin Drive?

Resin needs time to cure before it can take the weight of a car, and the wait depends mainly on temperature, as the mix sets faster in warm weather and slower in cool conditions. You will be told when the surface is ready for foot traffic and when it is safe to drive on.

Does Resin Bound Fade or Turn Yellow?

UV-stable resin is designed to stay clear in sunlight, which matters most with lighter aggregates. Resins without UV stability can yellow, so it is worth asking which type a quote includes. The natural stone colours themselves stay much the same, though any surface gathers some dirt in use.

How Do I Clean a Resin Bound Driveway?

Regular sweeping and an occasional rinse with a hose keep most resin drives looking fresh. A pressure washer on a moderate setting can lift stubborn dirt if it is kept moving and not held too close. Avoid leaving oil or fuel spills to sit, as they can mark the resin.
Contact

Can't Find the Answer You're Looking For?

Get in touch with us today.

01438 487210Get a FREE Quote